Conveyor Equipment Manufacturer In China

Tongxiang is a conveyor accessories and conveyor equipment manufacturer in China.Today we introduce the cause of chain - plate conveyor connecting chain ring fracture.
The chain plate conveyor used in all kinds of link chain is produced according to the relevant standards, its breaking load is about 10 times the tension of the chain plate, the safety factor is large, the broken chain accident should not happen in theory, but the connection chain failure rate in actual use is large, the main reason is:
1. The link chain link of the chain conveyer is subjected to the pulsating load for a long time, which is far below the breaking tension, and the fatigue is damaged, and the fracture is usually in the transition junction of the chain circle arc and the straight line.
2, chain conveyor chain link production quality is not up to standard, material and heat treatment level is not clear.
3. Chain plate conveyor chain link chain conveyor chain in operation with chain plate machine groove, sprocket, material and other friction and wear and tear, and the arc and line transition connection is the most serious wear area, the bearing section area gradually decreases, leading to the strength reduction, mainly for material or chain slots caused chain ring straight. There are 3 parts of the outer side of the line, the outer side of the arc part and the inner wear caused by the 22 connecting rings.
4, chain plate conveyor links chain corrosion, corrosion, pit, peeling, so that the cross-sectional area decreases, tensile strength decreases;
5, chain plate conveyor link chain material mixed with iron and so on chain chain, chain pull is broken.
6, chain conveyor chain link conveyor chain under full load or overload, frequent start, so that the impact of the transmission chain to withstand the force exceeding the limit.
7, chain link conveyor chain link chain pre tension is not enough, too loose, forming a stack chain, causing chain plate out of groove, chain chain phenomenon;
8, chain belt conveyor connecting chain ring pretension over ambassadorial chain too tight, speed up the chain wear and tear, in the chain, there is no buffer space, shorten the service life;
9. When the chain conveyor is connected with the distance of the chain ring more than two times the distance, when it is transferred to the head of the chain, the chain tension of the chain is carried out, the chain plate without chain plate is stretched, the chain plate can not slide, the next chain plate is also bandaged with the chain, and the chain is linked to the head unloading device, and the chain chain is caused.
10, chain conveyor conveyor chain link two chain tension is not consistent, so that the load is concentrated in the tight chain, thus exceeding the limit of strength.
We supply belt conveyor idler roller,mining crushing cement conveyors,if you need,contact us.

评论

发表评论

此博客中的热门博文

Maintenance Of The Belt Conveyor

图片
Tongxiang is a conveyor roller manufacturer and supplier in China.Today we introduce the maintenance of the belt conveyor . The general belt conveyor is composed of belt, roller, drum and driving device, brake, tensioning device, loading, unloading, sweeper and other devices. The operation of belt conveyer: 1, before the belt conveyor starts, check whether there are obstacles affecting the conveyor belt. If obstacles should be removed, observe whether the power supply is normal and measure the power supply to ensure the normal voltage required by the equipment. After the above operation is normal, it can start operation if the equipment is normal. 2, belt conveyor switch machine order attention: 1) the starting order: the power supply switch in the control box (the power indicator light shines) - the starting start button - the position of the speed control switch to "ON" - slowly rotating speed control knob to the required speed range. Make it operate at constant speed...
阅读全文

High Quality Conveyor Rollers Are More Competitive

图片
The role of the conveyor roller is to support the conveyor belt and the weight of the material. If you want to use your conveyor longer, the rollers must be flexible and reliable. Reduce the friction of the conveyor belt with the roller, and prolong the service life of the conveyor belt. The roller is a small part in the conveyor, and the structure is not complicated, but it is not easy to make high quality rollers. All kinds of rollers are advanced in structure, reliable in performance and strict in tolerance. It has the characteristics of wear resistance, acid and alkali resistance, salt resistance, stable operation, anti-theft, etc., and it can effectively prevent belt running off, reduce the partial loss of the belt, prolong the service life of the belt, and has high economic benefit, which can reduce the comprehensive cost of the belt conveyor and reduce the maintenance time. The efficiency of the   conveyor equipment  is improved.
阅读全文

Conveyor Pulley Manufacturers

图片
Tongxiang is a professional  conveyor pulley manufacturer in China. The conveyor pulley is mainly composed of rollers, frames, brackets, drive parts and so on. The roller and roller line rely on the friction between the rolling rollers and the objects to move the articles forward. According to its driving form, it can be divided into non power roller machine and power roller machine. In the dynamic roll axis, the drive roller of the present method is generally not used alone in the drive way, but the group used drive motor and reducer combination, and then through the chain drive, belt driven roller between the rotating drum line to connect the filter, can be used drum lines and other transport equipment or the composition of the complex plane the logistics delivery system, need to complete the process in many aspects. The accumulating roller can be used to carry out the packing and transportation of the material. The drum machine is simple in structure, high in re...
阅读全文