Common Problems In The Use Of Conveyor Belts
TongXiang is a conveyor equipment manufacturer china. Today we will give you a brief introduction of the common problems in the use of the conveyor belt.
What is the bonding method of the conveyor belt?
It is suggested that the adhesive tape of the conveyor belt should be bonded by hot vulcanization, and the core adhesive should be placed in the middle. Each step should have only one layer of cloth, and the direction of the joint should follow the direction of the conveyor belt.
Why are the joints of the conveyor belt cracking and breaking easily?
The strength of the joint at the conveyor belt is lower than that of the normal belt. When mechanical connection is used, the strength of the joint can only reach 40 to 50% of the body strength. When the quality of the cold bonding method is relatively good, the strength of the joint can reach 60 - 70%, while the thermal adhesive joint strength can reach 80 - 90% (the joint method is correct and the quality free defect). The joint strength is relatively low, if the bonding method is not correct, the joint strength will be more low, such as surgery, abrosive and a layer of cloth, excessive grinding, lap length is not enough, the step number is not enough, the rubber adhesive joint performance is not good or has been since sulfur loss or excessive grinding, wire rope the wire rope rust, joint strength will be greatly reduced, when in use, easy to appear the phenomenon of broken joints. In addition, if the conveyor belt does not use the sealing adhesive or the wrong direction of the adhesive joint, the joint part is easy to crack (the surface of the surface of the surface).
We provide high quality conveyor accessories including belt conveyor idler roller, Frame & Station. If you are interested in our products, please contact us at any time.
What is the bonding method of the conveyor belt?
It is suggested that the adhesive tape of the conveyor belt should be bonded by hot vulcanization, and the core adhesive should be placed in the middle. Each step should have only one layer of cloth, and the direction of the joint should follow the direction of the conveyor belt.
Why are the joints of the conveyor belt cracking and breaking easily?
The strength of the joint at the conveyor belt is lower than that of the normal belt. When mechanical connection is used, the strength of the joint can only reach 40 to 50% of the body strength. When the quality of the cold bonding method is relatively good, the strength of the joint can reach 60 - 70%, while the thermal adhesive joint strength can reach 80 - 90% (the joint method is correct and the quality free defect). The joint strength is relatively low, if the bonding method is not correct, the joint strength will be more low, such as surgery, abrosive and a layer of cloth, excessive grinding, lap length is not enough, the step number is not enough, the rubber adhesive joint performance is not good or has been since sulfur loss or excessive grinding, wire rope the wire rope rust, joint strength will be greatly reduced, when in use, easy to appear the phenomenon of broken joints. In addition, if the conveyor belt does not use the sealing adhesive or the wrong direction of the adhesive joint, the joint part is easy to crack (the surface of the surface of the surface).
We provide high quality conveyor accessories including belt conveyor idler roller, Frame & Station. If you are interested in our products, please contact us at any time.
评论
发表评论